Based on https://github.com/FrankenVoron/DoomCube-2

Replacement Vertical Extrusions with a rounded profile from LDO for the Doomcube mod.

Please note,

• You will need an existing Voron 2.4, and to print the printed parts yourself.

This is only the 4 vertical extrusions (of which 3 are pictured). You can reuse 2 of your existing verticals for the door verticals, and trim the other two down for door horizontals.

300mm (480mm) and 350mm (530mm) printer sizes are supported.

Hinges are not included, there are printable ones.