Hartk's ERCF toolhead PCB

The ERCF version of Hartk's toolhead pcb, with an extra microfit connector for 5V/FS.

This supports the filament sensor for ERCF, or can be used to power Stealthburner LEDs etc (the normal board has no 5V). Using the solder bridges, you can use 5V fans instead of 24V if you're a weirdo. If you split the 5V line, and use the XES signal port, you can use both ERCF filament sensor AND Stealthburner LEDs.

Comes with all the crimps and connectors you need.

Github here: https://github.com/VoronDesign/Voron-Hardware/tree/master/Afterburner_Toolhead_PCB