LDO Breakout PCB for in your electronics bay, with 2.1m cable to link to the toolhead PCB (toolhead pcb not Included).

This will work with Hartk's CW1 PCBs (e.g. the original toolhead pcb or the ERCF pcb, you'd need to run 2 extra wires for the ercf ones)

It will also work with the CW2 PCBs, both 1 and two piece, but be aware you'll need to change some wiring here: https://github.com/hartk1213/MISC/tree/main/PCBs/Stealthburner_Toolhead_PCB#ldo-kit-upgrade You will also still need 2 more wires for the secondary connector.

One single harness is much easier than a million separate wires!

https://docs.ldomotors.com/en/voron/toolhead_harness